spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 1 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 0.65x0.35mm smd chip led lamp (0.2mm height) part number: APG0603RWF-TT-5MAV white package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. features z 0.65mmx0.35mm smd led,0.2mm thickness z low power consumption. z wide viewing angle. z compatible with automatic placement equipment. z package: 4000pcs / reel. z moisture sensitivity level : level 2. z low current if=5ma operating. z rohs compliant. descriptions z the source color devices are made with ingan on sic substrate light emitting diode. z electrostatic discharge and power surge could damage the leds. z it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. z all devices, equipments and machineries must be electrically grounded. attention observe precautions for handling electrostatic discharge sensitive devices
spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 2 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 selection guide part no. emitting color (material) lens type iv (mcd) [2] @ 5ma v iewing angle [1] min. typ. 2 1/2 APG0603RWF-TT-5MAV white(ingan) yellow fluorescent 30 100 135 electrical / optical characteristics at ta=25c symbol parameter emitting color typ. max. units test conditions v f [1] forward voltage white 2.9 3.1 v i f =5ma i r reverse current white 50 ua v r = 5v x [2] chromaticity coordinates white 0.31 y [2] 0.31 notes: 1. forward voltage: + / -0.1v. 2. measurement tolerance of the chromaticity coordinates is 0.01. 3. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure. absolute maximum ratings at ta=25c notes: 1. 1 / 10 duty cycle, 0.1ms pulse width. 2. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd 625-a and jedec/j-std-033. parameter values units power dissipation 32 mw dc forward current 10 ma peak forward current [1] 50 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c electrostatic dischar ge threshold (hbm) 1000 v notes: 1. 1 / 2 is the angle from optical centerline where the lumi nous intensity is 1 / 2 of the optical peak value. 2. luminous intensity / luminous flux: + / -15%. 3. luminous intensity value is traceable to cie127-2007 standards.
spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 3 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 white APG0603RWF-TT-5MAV
spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 4 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 0.20 0.25 0.30 0.35 0.40 0.20 0.25 0.30 0.35 0.40 x y a2 a0 b1 b2 c0 white cie x y x y x y a2 0.263 0.213 a0 0.282 0.245 b2 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 b1 0.313 0.296 c0 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 APG0603RWF-TT-5MAV notes: shipment may contain more than one chromaticity regions. orders for single chromaticity region are generally not accepted. measurement tolerance of the chro maticity coordinates is 0.01.
spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 5 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 APG0603RWF-TT-5MAV reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm) reel dimension
spec no: dsao2867 rev no: v.4b date: may/12/2016 pa ge: 6 of 6 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1 203014741 packing & label specifications APG0603RWF-TT-5MAV terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
